For large recording and mastering studios, film and television post-production facilities, cinema applications and in-wall installations, nothing beats our main monitors SC3010 and SC3012.
Both models – SC3010 and SC3012 – feature a very powerful amplifier array, with one amplifier custom specified per driver. All drivers found in these models were completely developed from scratch to deliver a perfect balance of high sound pressure levels, low distortion and optimised directivity. Our proprietary AMT RS6 will redefine your perception of how a tweeter should perform. The RS6 was especially designed for unparalleled precise reproduction, even at high output levels, which will definitely help you take your mixes to the next level. We've also taken great care in the design of the front of the speaker, using an ultra-stiff front plate made out of a combination of rigid plywood and a special inner construction to reduce unwanted resonances. The result? Smooth directivity, very low distortion and a well defined middle and upper frequency range combined with a powerful and tight low end.
The SC3010/SC3012 systems were also built with in-wall installations in mind. When used in this manner, acoustic filter modifications can be engaged by adjusting the filter controls to "inwall". And a set of high-density quality foam is provided so that the backfiring bass ports can be physically closed, improving the quality and focus of the speaker's response.
The stylish silver module in the middle of the speaker not only houses the midrange woofer and our AMT RS6 tweeter, but it can also be rotated 90-degrees, allowing the speakers to be positioned either horizontally or vertically. This helps to preserve control room sight lines and further optimises acoustic performance.
• Description: Main System
• Dimensions (WxHxD) [mm]: 435 x 650 x 490
• Dimensions (WxHxD) ["]: 17.13 x 25.59 x 19.29
• Free-field frequency range (-3dB): 25Hz - 21kHz
• Tweeter: AMT RS6
• Midrange: 130mm/5"
• Woofer: 300mm/12"
• Cross-over frequency: 220Hz/1800Hz
• Maximum SPL @ 1m: 118dB
• Number of amplifiers: 3
• Output power (woofers): 800W
• Output power (mid-driver): 250W
• Output power (tweeter): 250W
• Protection limiter: Yes
• Volume: -inf. - +6dB
• High-shelf filter (-5dB - +3dB): > 3kHz
• Desk filter boost (0dB - +3dB): 80Hz
• Desk filter cut (-5dB - 0dB): 160Hz
• Low-shelf filter (-5dB - +3dB): < 300Hz
• LED brightness setting: Yes
• Level-lock dip switch: Yes
• Filter-lock dip switch: Yes
• Input level dip switch: +7dBu/+22dBu
• XLR in (impedance): Yes (10k)
• RCA in (impedance): Yes (10k)
• Power consumption:
• Standby: < 1W
• Full output: 1000VA
• Weight kg/lb.: 44 / 97